The stand alone key programming device is developed for programming additional original keys into new Land Rover/Jaguar (JLR) vehicles via OBD II even if all keys are lost. The device supports CAN BUS based models from 2010 MY till 2020 +. The programming of the key is made for 10 seconds and you can program maximum 8 keys in the car immobilizer memory. We have add a new function to the device like Emergency start and Alarm Bypass for vehicles from 09.2015 or vehicles with exchanged KVM module FK72… which is blocked for OBD II key programming and which function will allow you to start the vehicle in emergency mode without the need of programming a new key and you can bring the car to your local dealer or garage where you can install a new KVM module or reset the existing one of the vehicle to virgin state so you can use the online JLR SSD software or our JLR – L4 device to adapt new KVM and program mandatory two new keys when new or reset KVM module is fitted.
With the new JLR – L4 device you will get also two emulator keys which you can program to JLR vehicles with exchanged and blocked FK72…, JPLA… and K8D2 …. KVM modules in order to start the vehicle without performing every time an Emergency start to the veicle and bring the vehicle to your local dealer or garage in order to program two new remote keys after installing a new KVM module or reset the existing one. You will get two emulators free and must pay for every extra one you want to get.
New special functions of the device:
– The device can deactivate and stop the alarm and open the central locking of the new JLR models from outside the car by connecting to the CAN BUS wiring. Special functions for Auto Locksmiths.
– Programming of a key emulator on new JLR vehicles 2018-2020+ with active alarm with the new type of key.
– Emergency start of JLR vehicles with active alarm on 2018-2020+ models.
!!! IMPORTANT NOTE !!!: Customers who has already purchased the JLR – L3 device WILL NOT BE ABLE to upgrade to JLR – L4 device because of the different structure of the hardware of the new JLR – L4 device and the additional hardware which has to be used for CAN connection to the car !!!
We would like to let our customers know that this device is our own production and it is not the same device sold by other companies from Lebanon , Poland, China and etc. You can only get it throughout our distribution network! Our device doesn’t kill the car after programming but program them normally!
| Model | Model year | Vehicle Code |
| Land Rover Discovery IV | 2010 – 2016 | L319 |
| Land Rover Discovery V | 2017 – 2020+ | L— |
| Land Rover Discovery Sport |
2015 – 2020+ | L— |
| Range Rover VELAR | 2017 – 2020+ | L— |
| Range Rover Sport | 2010 – 2013 | L320 |
| Range Rover Sport II and Vogue |
2014 – 2020+ | L494 |
| Range Rover Mark III | 2010 – 2012 | L322 |
| Land Rover Freelander II | 2013 + | L359 |
| Land Rover Freelander III | 2014 – 2020+ | L550 |
| Range Rover Mark IV | 2013 – 2020+ | L405 |
| Range Rover Evoque | 2012 – 2020+ | L538 |
| Jaguar XE | 2014+ | X152 |
| Jaguar XF and F-Pace |
2013 – 2020+ |
X250 |
| Jaguar XJ and F-Type |
2010 – 2020+ | X351 |
| Jaguar E-Pace | 2017 – 2020+ | X540 |
| Jaguar I-Pace | 2018 – 2020+ | X— |