Fiat/Jeep/Chrysler/Maserati

Program  1  Emergency start:    1-2=ON 3-4-5-6=OFF Covered models: Fiat 500:2007-2020 Fiat 500 Abarth:2007-2020 Fiat 500L:2012-2020 Fiat Panda:2012-2020 Fiat Grande Punto:2007-2020 Fiat Fiorino:2010-2020 Fiat Qubo:2010-2020 Fiat Doblo:2011-2020 Fiat Ducato:2012-2020 Alfa Romeo Mito:2008-2020 Alfa Romeo Gulietta:2012-2020 Lancia Ypsilon:2011-2020 Citroen Jumper:2012-2020 Peugeot Boxer:2012-2020 Ford KA:2016-2020 Opel Combo:2012-2020   !!!Cars after MY2018 is possible to have SGW,in this case please use SGW bypass!!!   Insert the device into OBD2 socket and turn ignition ON, after 2seconds green led will light up and car is ready to start. ----------------------------------------------------------------------------------------------- Iveco Daily 2012-2015   Insert the device into OBD2 socket and turn ignition ON, orange LED light up,disconnect BCM power cable-reconnect it, turn ignition off for 2 seconds and than turn it ON, green LED will light up and car is ready for start   ------------------------------------------------------------------------------------------------ Iveco Daily 2015-2020 Insert the device into OBD2 socket and turn ignition ON, orange and red LED will light up and green will blink and goes off, wait between 2min and 15min until green LED comes ON and orange LED is OFF, turn ignition OFF wait 2sec and turn it ON and start car.   ------------------------------------------------------------------------------------------------- Program 2  Key programming     3-4=ON   1-2-5-6=OFF Covered models: Fiat 500X:2014-2020 Jeep Renegade:2014-2020   !!!After MY2018 use SGW bypass!!! Insert device into OBD2 socket,green LED will start flashing, take one blank key and point it to start button or radio screen, and press unlock button of key for 2 sec,repeat this step until green LED remains steady ON and car locks will unlock.Key is programed and car is ready to start   ---------------------------------------------------------------------------------------------------- Program 3  Key programing    5-6=ON   1-2-3-4=OFF   Covered models: Alfa Romeo Stelvio:2017-2020 Alfa Romeo Giulia:2016-2020   !!!After MY2018 please use SGW bypass!!! Insert device into OBD2 socket, green LED will start flashing, take one blank key and point it to radio screen, and press unlock button of key for 2 seconds, repeat this step until green LED remains steady ON and car locks will unlock.  Key is programed and car is ready to start. Warning! The picture is for illustration purposes only!!! The actual product may differ!!! Attention! The device is not intended for illegal use!!!